Descripción
Built for a 1m x 1m tent. At 950 x 950mm, this fixture is sized to match the most common grow tent footprint in the UK almost exactly, so you get edge-to-edge coverage without light spilling past the canopy or leaving cold corners.
A full-spectrum LED grow light with enhanced red spectrum output for stronger flowering results. The foldable frame and internal driver mean it's ready to hang and plug in, no separate ballast to find room for.
Key features
- Sized for a 1m x 1m tent, 950 x 950mm footprint
- 660W maximum power, 1650 PPF light output
- Up to 2.6 µmol/J efficiency
- Full-spectrum output with enhanced red spectrum
- Premium Sanan 2835 & 3030 LEDs, 2070 diodes total
- Foldable 6-bar frame with built-in internal driver
- 0–100% stepless dimming
- IP65 water-resistant rating
- UK plug supplied, CE & RoHS certified
Full specifications
| Spec | Value |
|---|---|
| Tent size fit | 1m x 1m |
| Dimensions (L x W x H) | 950 x 950 x 47.5mm |
| Maximum power | 660W ±3% |
| Light output | 1650 PPF |
| Efficiency | Up to 2.6 µmol/J |
| LEDs | Sanan 2835 & 3030, 2070 diodes |
| Spectrum | Full spectrum with enhanced red |
| Dimming | 0–100% stepless |
| Voltage / current | 220–277V / 2.3–3.3A |
| Protection rating | IP65 |
| Weight | 5.8kg |
| Plug | UK plug |
| Certifications | CE & RoHS |
FAQs
Will this fit my 1m x 1m tent?
Yes — at 950 x 950mm it's built almost exactly to that footprint, giving full canopy coverage with minimal wasted light at the edges.
Does it need a separate driver or ballast?
No — the driver is built into the fixture, so it's ready to hang and plug in.
Can it be controlled by a lighting controller?
Yes — it supports 0–10V control systems and can be daisy-chained with a compatible Solar-Tech controller for centralised dimming and scheduling.
