Beschreibung
C800 Pro pH & EC Controller
If you’re serious about automated feeding, this is where you start.
The C800 Pro monitors pH, EC, PPM, TDS and temperature in your tank, then doses automatically to keep everything exactly where you set it. No daily tweaking. No drifting EC. No chasing pH swings.
Simple Mans Definition Of What This Does: It keeps your tank stable without you standing over it.
Watch It Working
How It Connects
You get two dedicated outputs:
- Left UTP – pH pump only
- Right UTP – nutrient pumps, up to five
Run it as full automation or just control the part you need. pH only. Nutrients only. Or both.
Setup Demo
Touchscreen + App Control
The onboard screen shows live readings and alarms clearly. No digging through menus.
Connect it to the Aqua Master Tools app and you can:
- Adjust set points remotely
- Store feeding schedules
- Receive alarm notifications
- View up to 12 months of data history
- Manage multiple controllers from one app
App Demo
Choose Your Setup
You can buy the controller on its own, or as a kit with dosing pumps included.
C800 Pro – Controller Only
Best if you already own pumps or want to build your system gradually.
Included:
- C800 Pro controller
- pH probe
- EC probe with temperature sensor
- Power adapter
- User manual
Capacity: Up to 5 EC pumps and 1 dedicated pH pump.
C800 Pro + C10 (1 Pump Kit)
One dosing channel. Ideal for automated pH control or a single nutrient line.
The C10 doses at 1.5 ml per second and includes a manual priming button for setup.
Included:
- Everything in Controller Only
- 1× C10 pump
- 3m tubing
- UTP cable 150 cm
- Power adapter
C800 Pro + C20 (2 Pump Kit)
Two independent nutrient channels. Perfect for A+B systems.
Each pump runs at 1.5 ml per second and can be primed individually.
Included:
- Everything in Controller Only
- 1× C20 with 2 pumps
- 2× 3m tubing
- UTP cable 150 cm
- Power adapter
C800 Pro + C30 (3 Pump Kit)
Three nutrient lines automated from day one. Expand later if needed.
Add a C10 to reach four lines or a C20 to reach five.
Included:
- Everything in Controller Only
- 1× C30 with 3 pumps
- 3× 3m tubing
- UTP cable 150 cm
- UTP cable 50 cm for expansion
- Power adapter
Maximum system: 5 nutrient pumps plus 1 pH pump per controller.
Pump Guide
C10 = 1 pump
C20 = 2 pumps
C30 = 3 pumps
Scale it based on how complex your feeding program is.
